Australia’s Safeguard Mechanism – What you Need to Know
What is the Safeguard Mechanism
The Australian government’s Safeguard Mechanism mandates that the country’s biggest greenhouse gas emitters must keep their net direct (scope 1) emissions below a prescribed limit, which is also known as a baseline.
The Safeguard Mechanism complements the governments Emissions Reduction Fund (ERF) program and is legislated under the National Greenhouse and Energy Reporting Act of 2007. The Safeguard Mechanism is managed by the Clean Energy Regulator.
Who is covered by the Safeguard Mechanism?
The Safeguard Mechanism covers large industrial facilities with annual scope 1 emissions over 100,000 tonnes of CO2e. In 2020–2021, there were 212 captured facilities contributing approximately 28% of Australia’s overall greenhouse gas emissions.
What are baselines and what happens if they are breached?
Each Facility under the Safeguard Mechanism has a baseline that is equal to or exceeds 100,000 tCO2e. This baseline establishes a cap on the total net emissions for the Facility for the reporting year.
Responsible emitters are required to relinquish Australian Carbon Credit Units (ACCUs), or Safeguard Mechanism Credits (SMCs) for additional emissions above the cap. Conversely, SMC’s may be issued where a facility sits below its cap, incentivising further emissions reductions.
Where do the emissions reductions come from with the Safeguard Mechanism policy?
Importantly, the emissions reductions targeted by the Safeguard Mechanism arise from improvements in emissions intensity, not absolute emissions. Savings may come from various sources that vary significantly in terms of cost, risk and timing. Opportunities include:
- Fuel switching from coal/gas to renewable energy sources including green hydrogen, biogas and increasingly, industrial heat pumps.
- Utilising catalysts or conducting process optimisation to abate industrial emissions
- Implementing efficiency measures to reduce energy consumption and emissions from industrial processes.
- Implementing carbon capture and storage technologies.
- Adopting measures to improve waste management and reduce methane emissions from landfills.
In hard to abate sectors, there may not be feasible decarbonisation options available. In these cases, emitters may need to partner with other emitters with excess SMCs or seek to generate nature-based ACCUs through the ERF. Careful analysis is required to identify the best opportunity but experts are available to help.
What is the ERF and how does it support the Safeguard Mechanism?
The Emissions Reduction Fund (ERF) was introduced in 2014 and is administered by the Clean Energy Regulator. The ERF is designed to incentivise emissions reductions by enabling emitters to monetise abatement opportunities where there is an available ERF method.
Broadly, there are two key means to create ACCUs. They can be created through carbon abatement (for example, avoiding industrial emissions) or carbon sequestration (for example, planting trees). Both approaches have different trade-offs and should be explored carefully by prospective proponents.
Why do we need the Safeguard Mechanism?
The Safeguard Mechanism is designed to ensure the largest emitters in the country are taking action to reduce their emissions. Without this policy, are currently few other mechanisms in place to limit the emissions of Australia’s largest emitters or to hold them accountable for their emissions. The policy also encourages emissions reductions through a market-based approach that allows emitters to trade emissions permits, providing an incentive for the most cost-effective emissions reduction options to be pursued.
The revised 2023 Safeguard Mechanism is a significant improvement on how the scheme functioned in the past to accelerate decarbonisation and will be a necessary policy lever to help Australia achieve its emissions reductions of 43% (below 2005 levels) by 2030.
What are recent the Safeguard Mechanism reforms?
In 2022 the Australian Government announced plans to dramatically increase the ambition of the Safeguard Mechanism to align with its new climate targets of a reduction in emissions of 43% by 2030.
The reforms mean facilities covered by the safeguard mechanism must reduce emissions by 4.9% year-on-year, depending on the industry and starting intensity and trade exposure. This would mean an overall aggregate abatement of about 170 million tonnes of CO2e to 2030. Learn more about the new reforms and in our pieces Unpacking the Safeguard Mechanism Proposed Reforms and Safeguard Mechanism – Why offsets are not an excuse for inaction.
Need help with the Safeguard Mechanism or the ERF?
Carbon is the currency of climate change and at Ndevr Environmental we’ve been helping our clients, including some of the highest emitters in Australia, measure and reduce their carbon emissions for over 13 years.
Please reach out to us if you’d like to discuss how we can help with compliance reporting to NGERs, ERF or Safeguard Mechanism, guidance on Net Zero or ESG strategies and beyond. We are here to help you mitigate risk, explore opportunities and accelerate your transition to a decarbonised and more sustainable business. Call +61 3 7035 1740 to speak with one of our experts.
Thomas is a Director of Carbon, Energy and Climate at Ndevr Environmental and experienced strategy and carbon pricing specialist. Thomas excels in supporting large organisations manage the transition to a low carbon economy. View Thomas’s Profile